The CLK rate (SPI-ClockRate) defines the clock of the SPI bus. Therefore a data bit is transmitted at each clock impulse, the CLK frequency presents the data transmission rate.
Example: Clk rate 2 MHz - data transmission= 1/Clock frequency = 0,5 µs/bit.
The CLK-rate (SPI-ClockRate) can be set between 10 kHz to 20 MHz (predefined 2 MHz).
The settings are done at the SPI-Bus-Configuration window.
| Procedure | |
|
Open the SPI-Bus-Configuration window. |
|
Enter the both parameters in the desired field of the section Bus-Parameter by clicking on the field. |
