Sensor-signals

Section of the sensor signal definition (Detailed description).

SensorSignal	Description	Value	Predefined
xSignal[0]	Placeholder of a defined signal with automatic index combined with the parameter Name.	The field is filled automatically and cannot be edited.	Signal
Bitoffset	Number of bits, which are not used for the data value.	Direct value input.	0
CS_Number	Assignment to the CS signal and therefore to the connected sensor. CS0=1. sensor, CS1=2. sensor, CS2=3. sensor, CS3=4.sensor.	Direct value input of the decimal number, which results from the bit code: 0001 = input value 1 = CS0 - assigned to the 1. sensor, 0010 = input value 2 = CS1 - assigned to the 2. sensor, 0100 = input value 4 = CS2 - assigned to the 3. sensor, 1000 = input value 8 = CS3 - assigned to the 4. sensor, 0000 = 0 = no CS line assigned	0
DecoderMask	Mask of the used bits of the master data commands.	Detailed description	0x0
DecoderValue	Reading commands of getting the signal values.	Detailed description	0x0
Description	Addtional text field for description the signal (only been shown here)	Direct input	Description
Name	Freely selectable, textual description of the signal. The uniqueness is done by the automatic index [0], therefore it is possible to set the same description several times.	Direct input	Signal
Offset	Offset of the signals with a value of the unit. This enables an optimal display of all signals at the presentation window.	Direct value input of the unit (standard LSB)	0
PlotfillMode	Kind of line presentation	Selection form the list	None
PlotLineColour	Colour of the line	Selection form the list	DeepPink
PlotLineStyle	Style of line	Selection form the list	Solid
PlotLineWidth	Width of line	Direct entry in pt,	1
PlotPointcolor	Colour of the value point	Selection form the list	DeepPink
PlotPointStyle	Kind of the value point	Selection form the list	None
PlotVisible	Selection whether the line resp. signal is displayed or not	True = Signal is visible False = Signal is hidden	True
Scale	Scale factor, which calculates the incoming measurement signal to the line value. Factor 1 means, that the input voltage of +/- 10 V is sampled directly. Factor 2 means, that the real input value was divided by two before injection. This allows the presentation of the real voltage relations out of the Simulyzer.	Direct value input as a factor.	1
SignalDescriptor	Further textual signal description.	Not editable - predefined with the parameter Name.	Signal
Data width	Number of bits of the data frame (data value + status + error detection bits).	Direct value input	10
Number Representation	Format of the data value (see sensor data sheet of the manufacturer).	Selection list: TwoComplement or SignedMagnitude Value	TwoComplement
Signed	Definition of signed signal.	True=Signal has negative values. False=Signal only has positive values.	True
SoftwareChannel	Definition whether the signal is FPGA decoded or not. If the signal is comming from the hardware channel, the signal can be triggered. (see trigger).	True=Software channel signal False=Hardware channel signal	False
TextDisplayFormat	Display format of the data value in the sensor data window.	Selection list: hex=hexadecimal dec=number phys=Physical value	hex
Unit	Freely selectable description of the physical value, which is meassured. The setting is used for the settings of the axes.	Direct input	LSB